PROcess FIeld BUS

This system cable is used to interconnect L2-BUS components. This cable is an economical solution for the cell and field area. For the information exchange between different automation systems as well as for communication with the connected decentralized field units, serial field bus systems are used. The types mentioned here are suitable for indoor laying and are equipped with a special PVC sheath.

Standard : Adapted to DIN 19245 & EN 50170
Operating Top Level Voltage : Max. 250 V (not for purpose of high current and power installation)
Insulation Resistance : Min. 5000 GΩ x cm
Temperature Range : Flexing -5°C to +70°C. Fixed installation -30°C to +70°C
Minimum Bending Radius : Flexing 12 x cable ø. Fixed installation 6 x cable ø
Test Voltage : 1500V
Mutual Capacitance : Approx. 35 nF/km
Characteristic Impedance : 100 Ohm ± 15
Inductance : Approx 0.65 mH/km
Conductor Resistance (loop) at 20°C : 110 Ω/km

Bare copper stranded wires, 7-wires.
Core insulation of PE (Polyethyelene).
Core colours – red & green.
Cores stranded in pair with optimal lay-length.
Plastic coated aluminium foil wrap.
Tinned copper braided screen, approx 85% coverage.
Special PVC outer sheath TM2, to EN 50363-4.1.
Sheath colour : Violet

Flame retardant to IEC 60332-1-2.