Application

Connecting between the frequency convertor and the motor for power circuits in machine cabling. In dry damp or wet interiors with normal mechanical stress conditions. For outdoor usage within the permitted range of temperature.

Technical Data

Standard :Adapted to VDE 0250 / 0281 / 0282
NominalVoltage: UO / U 600 / 1000V. Control cores 250V
Insulation Resistance : Min. 20 GΩ x cm
Temperature Range : Flexing -5°C to +70°C. Fixed installation -30°C to +70°C
Minimum Bending Radius : Flexing 12 x cable ø. Fixed installation 4 x cable ø
TestVoltage : 4000V. Control cores C / C : 1500V, C / S : 750V

Cable Construction

Flame retardant according to EN 60332-1-2.
The version with special TPE insulation ensures low mutual capacitance, lower dielectric loss, low screen interference currents.
Features TPE-insulation secures a lower dielectric loss, double potential strength, high longevity and low screen-inter
ference currents.
Meets EMC requirements.
Due to the optimal screening an interference-free operation of frequency converters is obtained.
UV resistant to ASTM G 154.

Properties

Extensively oil resistant.
Abrasion and notch resistant.
Low adhesive surface.
Resistant to hydrolysis and microbes.
UV resistant to ASTM G 154.
The screening density assures disturbance-free transmission of all signals and impulses.
To optimize the EMC features we recommend a large round contact of copper braiding on both ends.

Cable Design Parameters

Note :
* G = With green/yellow earth core
X = Without green/yellow earth core (OZ)